Catskill Craftsmen 15445 - Manual (Page 6)

STEP 4
Assemble Cabinet Sides – (We recommend using a second person to help with alignment)
A. Lay a Right Back/Left Front Leg on its back and attach the Top Side Brace to the upper left
corner using the bastion posts and steel pins. Also attach the Middle Side Brace and Bottom Side
brace in like manner. Now slip in the Side Rods into the big holes and fit in the Glide Support Brace
into the upper right side so the holes are down and toward the bottom of the brace. Then fit the side
panel on the right side of the back leg using 3/4” pins. Make sure that the holes in the braces face
the side panel and glide support. This should now look like illustration 4A.
B. Now take a Left Back/Right Front Leg and fit it onto the assembled unit using bastion
post/pins. Now it should look like illustration 4B.
C. Assemble the other side by repeating steps A & B.
Illustration 4A
Illustration 4B
TOP
BACK
BOTTOM
FRONT
Top Side
Glide Support
Middle Side
Side Panel
Bottom Side
IMPORTANT!
Middle Side Brace must be
assembled with the off-center
holes towards the inside of
the cart, rounded edge on the
outside of cart. If the brace is
assembled with holes towards
the outside of the cart, the
center shelf will not fit.
Toward inside
of cart
Note: Some people find it
easier to place the leg flat
on it’s face with the holes
up. See assembly video.