Catskill Craftsmen 61532 - Manual (Page 8)

STEP 7
Take the 2 front braces and tap/insert one 3/4”
steel pin into each end of both braces until seated.
About 3/8” will stick out when seated. Ok if loose.
STEP 8
A. Take the top front brace (with
magnet block), insert the pins in
the brace ends into the slots of
the inside of the front legs and
slide down until the holes in the
brace ends align with the holes in
the front legs as in the illustration.
The pin holes for the door pins
will be up as will the magnet
block.
B. Secure brace with 1 3/4” bolts
and hex nuts.
4 used in this step
3/4” Long 3/16” DIA. Steel Pin
1 1/4” #8 Bolts
Insert Brace Pins Here
Glide Support
Assembly
2 used in
this step
1 3/4” Phillips Flat Head Bolt
2 used
in this step
10-24 Hex Nut
ILLUSTRATION 8