Catskill Craftsmen 64024 - Manual (Page 11)

C. Attach the drawer glides to the side panels using 1” #6 screws and round plastic spacers. See
Illustration 5C to locate holes. See Illustration 5C for glide attachment guide. Make sure you have the
right screw (this is the small diameter screw).
Note: Although there are 4 holes in our side panels for glide screws, use holes 1 and 3 front to back.
Glide holes
Insert Round Plastic Spacer
between cabinet and drawer glide
Not Used
Plastic Spacer
Glide
Plastic Spacer
Not Used
Illustration 5C
Front Brace omitted to show placement
Note: Drawer glides are flush with front edges of side panels. Use holes in glides that align with
1st and 3rd pilot holes in the side panels as glides may have more or less holes than illustrated.