Catskill Craftsmen 64024 - Manual (Page 9)

STEP 5
Attach Front Assembly to Back Assembly with Side Panels
A. This step is easier with 2 persons! Take the front assembly and attach the 2 side panels with three
1 1/4” screws per side. Push screws through the three holes on the front face of each leg, aligning
the screws with the pilot holes in the long edges of the panels. Start all three into the pilot holes, then
tighten them down. Repeat with the other side panel. Illustration 5 shows side panels in place attached
to the front assembly.
Illustration 5