Delmhorst Instrument Moisture Check - Manual (Page 18)

Copyright  2005, Delmhorst Instrument Co.
Page 18 of 29
on the right side. Alternately, pressing the Left button causes the meter to subtract 10
from the current left-side value.
o DONE: Selecting this option signals to the meter that the user has completed the reading
recall setup process and is ready to begin reviewing readings.
NOTE: There may be a significant delay while the meter processes the required set of readings
for review, depending on the number of jobs present in the meter, percentage of memory space
occupied by readings, current job size and fragmentation. The meter will display a screen with the
word “PROCESSING…”. User input is ignored during this time. Control is returned to the user
once the algorithm is complete and the Retrieved Readings screen is displayed, as shown in the
example above:
Cancel: This feature returns the meter to the Storage Menu
•
CLEAR MEMORY:
This option will delete all the readings stored in the meter, but will keep the defined job
structures in tact.
§ RESTORE DEFAULTS:
This will delete all defined parameters and readings stored in the meter. The meter will be
now set to the factory parameters: T = 70F, Non-insulated probe, Backlight = OFF,
Power-off time = 2 min.
Note: Memory deletion and restoring defaults are both irreversible.
§ EXIT:
This menu option returns the meter to Main Menu.
IR LINK:
This menu option initiates a wireless communication session during which the currently
stored readings will be downloaded to a PC. Before using this feature, the target PC must be
loaded with Delmhorst’s Universal Application Program and a Delmhorst base unit must be
connected to an available USB port.
Requirements:
The wireless communication technology employed in the meter requires line-of-sight access
between the red side window of the meter and the receiving window of the Base Unit. Simply
place the meter and Base Unit on a flat surface, with the red side window of the meter facing the