Detcon TP-624C - Manual (Page 24)

3.15 W
ARRANTY
Detcon, Inc., as manufacturer, warrants each hydrogen sulf ide sensor element (PN 399-800000-000), for a ten year
period under the conditions described as follows: The warranty period begins on the date of shipment to the origi-
nal purchaser and ends two years thereafter. The sensor element is warranted to be free from defects in material and
workmanship. Should any sensor fail to perform in accordance with published specif ications within the warranty
period, return the defective part to Detcon, Inc., 3200 A-1 Research Forest Dr., The Woodlands, Texas 77381, for
necessary repairs or replacement.
First year No Charge
2nd-5th years $25.00 handling charge
6th year $60.00 handling charge
7th year $96.00 handling charge
8th year $120.00 handling charge
9th year $150.00 handling charge
10th year $176.00 handling charge
Warranty voided $200.00 charge
Non-warranty $295.00 charge
Terms & Conditions
* The original serial number must be legible on each sensor element base.
* Shipping point is FOB the Detcon factory.
* Net payment is due within 30 days of invoice.
* Detcon, Inc. reserves the right to refund the original purchase price in lieu of sensor replacement.
3.16 S ERVICE P OLICY
Detcon, Inc., as manufacturer, warrants under intended normal use each new MicroSafe™ plug-in control circuit to be free from defects in
material and workmanship for a period of two years from the date of shipment to the original purchaser. Detcon, Inc., further provides for a
five year fixed fee service policy wherein any failed transmitter shall be repaired or replaced as is deemed necessary by Detcon, Inc., for a fixed
fee of $65.00. The fixed fee service policy shall affect any factory repair for the period following the two year warranty and shall end five years
after expiration of the warranty. All warranties and service policies are FOB the Detcon facility located in The Woodlands, Texas.
Detcon Model TP-624C Hydrogen Sulfide Sensor PG.24
Spash Guard
Rain Shield
Enclosure less cover
Connector Board
Calibration Adapter
Enclosure glass lens cover
Plug-in control circuit
H2S Sensor in Housing
Programming Magnet
Condensation
Prevention Packet
(replace annually)
Figure #8