Fire-Lite IPDACT-2 - Manual (Page 12)

II - 1.3. Turning IPDACT-2 into IPDACT-2UD
The IPDACT-2 can be turned into an IPDACT-2UD by carrying out the
following steps:
•
The device must be powered off.
•
Take the two berg headers out of the jumpers labeled as A and B.
Figure 7. Closer view of A and B jumpers.
IPDACT-2(UD) - Description
II-9
Doc.DM385-I
Rev. 4.0