GW Instek GDS-1000 Series Programming Manual - Manual (Page 20)

COMMAND DETAILS
39
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vmin?
Selects Channel 1, and
then measures the
minimum amplitude.
60B
:MEASure:VPP Query
Description Returns the peak-to-peak amplitude (difference
between maximum and minimum amplitude)
Same as: Measure key → F1~F5 → F3 (Vpp)
Syntax < Long > < Short >
:measure:vpp? :meas:vpp?
Returns <NR3>
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vpp?
Selects Channel 1, and
then measures the
peak-to-peak
amplitude.
61B
:MEASure:VRMS Query
Description Returns the root-mean-square voltage.
Same as: Measure key → F1~F5 → F3 (Vrms)
Syntax < Long > < Short >
:measure:vrms? :meas:vrms?
Returns <NR3>
Note Before using this command, select the
measurement channel. See the example below.
Example :measure:source 1
:measure:vrms?
Selects Channel 1, and
then measures the root
mean square voltage.
GDS-1000 Programming Manual
40
12B
Save/Recall Command
:MEMory<X>:RECall:SETup ........................................
244H
40
:MEMory<X>:RECall:WAVeform .................................
245H
40
:MEMory<X>:SAVe:SETup ..........................................
246H
41
:MEMory<X>:SAVe:WAVeform ...................................
247H
41
*RCL.............................................................................
248H
42
:REF<X>:DISPlay..........................................................
249H
42
:REF<X>:LOCate ..........................................................
250H
43
:REF<X>:SAVe..............................................................
251H
43
*SAV.............................................................................
252H
44
62B
:MEMory<X>:RECall:SETup Set
Description Recalls a panel setting from the internal memory.
Same as: Save/Recall key (recall) → F3
Syntax < Long > < Short >
:memory<x>:recall:setup :mem<x>:rec:set
Parameter <X> Internal memory
1 ~ 15 S1 ~ S15
Example :memory1:recall:setup Recalls the settings from
the internal memory S1
63B
:MEMory<X>:RECall:WAVeform Set
Description Recalls a waveform from the internal memory and
saves it to a reference waveform.
Same as: Save/Recall key (recall) → F4
Syntax < Long > < Short >
:memory<x>:recall:waveform
<NR1>
:mem<x>:rec:wav
<NR1>
Parameter <X> Internal memory