GW Instek GDS-1000 Series Programming Manual - Manual (Page 26)

COMMAND DETAILS
51
Description Selects or returns the trigger mode.
Same as: Trigger key → F5
Syntax < Long > < Short >
:trigger:mode <NR1>
:trigger:mode?
:trig:mod <NR1>
:trig:mod?
Parameter <NR1> Trigger mode
1 Auto
2 Normal
Note Before using this command, select the edge or
pulse trigger. See the example below.
Example :trigger:type: 0
:trigger:mode 2
Selects the edge trigger
and normal trigger
mode
85B
:TRIGger:NREJ
Set
Query
Description Turns the noise rejection mode on/off.
Same as: Trigger key → F4 → F4
Syntax < Long > < Short >
:trigger:nrej <Boolean>
:trigger:nrej?
:trig:nrej <Boolean>
:trig:nrej?
Parameter <Boolean> Noise rejection mode
0 off
1 on
Note Before using this command, select the edge or
pulse trigger. See the example below.
Example :trigger:type 0
:trigger:nrej 0
Selects the edge trigger
and turns off the noise
rejection
GDS-1000 Programming Manual
52
86B
:TRIGger:PULSe:MODe
Set
Query
Description Selects the trigger mode in the pulse trigger.
Same as: Trigger key → F1(Pulse) → F3
Syntax < Long > < Short >
:trigger:pulse:mode <NR1>
:trigger:pulse:mode?
:trig:puls:mod <NR1>
:trig:puls:mod?
Parameter <NR1> Mode <NR1> Mode
0 < 2 =
1 > 3 ≠
Note Before using this command, select the pulse
trigger. See the example below.
Example :trigger:type 2
:trigger:pulse:mode 0
Selects the pulse trigger
and < (smaller than) as
the trigger mode
87B
:TRIGger:PULSe:TIMe
Set
Query
Description Selects the trigger time in the pulse trigger.
Same as: Trigger key → F1(Pulse) → F3 → Variable
knob
Syntax < Long > < Short >
:trigger:pulse:time <NR3>
:trigger:pulse:time?
:trig:puls:tim <NR3>
:trig:puls:tim?
Parameter <NR3> Trigger time
20e -9 ~ 10 20ns ~ 10s
Note Before using this command, select the pulse
trigger. See the example below.