GW Instek GDS-1000 Series User Manual - Manual (Page 73)

CONFIGURATION
73
System Settings
The system settings show the oscilloscope’s system information and
allow changing the language.
Viewing the system information
Procedure 1. Press the Utility key. Utility
2. Press More.
3. Press System Info. The upper
half of the display shows the
following information.
 Manufacturer  Model
 Serial number  Firmware version
4. Press any other key to go
back to the waveform
display mode.
Selecting the language
Parameter Language selection differs according to the region
to which the oscilloscope is shipped.
 English  Chinese (traditional)
 Chinese (simplified)  Others
Procedure 1. Press the Utility key. Utility
2. Press Language repeatedly to
select the language.
Language
English