GW Instek GDS-1000 Series User Manual - Manual (Page 85)

SAVE/RECALL
85
SD card External card, no practical
limitation on the amount of file.
When saved, the image file will be
placed in the root directory.
6. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display.
Note
The file will not be saved if the
power is turned off or SD card is
disconnected before completion.
File utilities To edit SD card contents
(create/ delete/ rename files
and folders), press File Utilities.
For details, see page77.
Saving all (panel settings, display image, waveform)
Procedure 1. (For saving to an external
SD card) Insert the card into
the slot.
2. Press the Save/Recall key
twice to recall the Save
menu.
Save/Recall Save/Recall
3. Press Save All. The following
information will be saved.
Setup file
(Axxxx.set)
Two types of setups are saved:
the current panel setting and
the last internally saved
settings (one of S1 ~ S15).
Display image
(Axxxx.bmp)
The current display image in
the bitmap format.