GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 23)

GETTING STARTED
23
Select AC mains frequency (50/60Hz)
Background Although the LCR-8000G works under both 50 and
60Hz power frequencies, we recommend selecting
the frequency that matches the local setting to get
the best measurement precision, especially at
lower frequencies (< 100Hz).
Panel operation 1. Press the Menu key, then F5
(System). The system menu appears.
Menu
F 5
Precision LCR Meter LCR-8101
5
:
Frequency
Software version 2.03 Oct 25 2008
RS-232
GPIB
Graph mode
Line frequency
Beep
GPIB address
:
:
OFF
50Hz
1MHz
Average : 10
2. Press the Up/Down key and move
the cursor to Line frequency.
: Line frequency 50Hz
3. If necessary, press the Left/Right
key to select the frequency, from 50
to 60Hz or from 60Hz to 50Hz.
: Line frequency 60Hz