GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 62)

LCR-8000G Series User Manual
62
Beep in repetitive
mode If the repetitive measurement is On, the beep
might sound continuously. If this becomes a
problem, either use the Single mode (press
Sing/Rep key) or turn Off the beep.
Configure the Average
Background The Average function sets the number of samples
used, which are then averaged as the final output.
The number of samples varies from 1 to 256.
Panel operation 1. Press the Menu key, then F5
(System). The system configuration
appears.
Menu
F 5
Precision LCR Meter LCR-8101
5
:
Frequency
Software version 2.03 Oct 25 2008
RS-232
GPIB
Graph mode
Line frequency
Beep
GPIB address
:
:
OFF
50Hz
1MHz
Average : 10
2. Press the Up/Down key and move
the cursor to Average.
Average : 10
3. Use the number pad to select
numerical keys to enter the number
of samples to be averaged. A
maximum of 256 samples can be
selected for averaging.