GW Instek LCR-8101 (Replaced by LCR-8101G) - Manual (Page 58)

LCR-8000G Series User Manual
58
P
ASS-FAIL MODE
In the Pass/Fail test mode, measurement results are
compared with user-defined limits and the results
are displayed. Two types of tests are available: Single
and Multi-Step. The Single test shares the same
interface with the basic measurement, and tracks one
item. The Multi-Step test runs a program comprised
of multiple measurement items with different
parameters.
Single-step
configuration
Overview ...................................................................... 60
Configure beep setting ................................................ 61
Configure the Average ................................................. 62
Select test item and scale (Pass/Fail test) .................. 63
Set parameters ............................................................. 64
Single-step run
Run in Absolute mode ................................................. 66
Run in Percentage mode ............................................. 67
Run in Delta mode ...................................................... 68
Use display value as nominal ...................................... 69