GW Instek GDS-2000 series Uer manual - Manual (Page 132)

GDS-2000 Series User Manual
132
USB External flash drive, no practical
limitation on the amount of file.
When saved, the waveform file is
placed in the root directory.
Ref Internal reference waveform, A~D
6. Press F4 (Save) to confirm
saving. When completed, a
message appears at the
bottom of the display.
Save F 4
Note
The file will not be saved if the
power is turned Off or USB drive is
taken out before the message.
USB file utility To edit USB flash drive
contents (create/ delete/
rename files and folders), press
F5. For details, see page123.
File
Utilities
F 5
PC software
(FreeWave) Saving waveform is also
available through the
proprietary PC software,
downloadable from GWInstek
website.
Save display image
Panel operation 1. Connect the drive to the
front or rear panel USB port.
Note: Only one host
connection, front or rear, is
allowed at a time.
Front Rear
2. Press the Save/Recall key.
Save/Recall