GW Instek GDS-2000 series Uer manual - Manual (Page 57)

MEASUREMENT
57
FFR Time between:
Source 1 first falling edge and
Source 2 first rising edge
FFF Time between:
Source 1 first falling edge and
Source 2 first falling edge
LRR Time between:
Source 1 first rising edge and
Source 2 last rising edge
LRF Time between:
Source 1 first rising edge and
Source 2 last falling edge
LFR Time between:
Source 1 first falling edge and
Source 2 last rising edge
LFF Time between:
Source 1 first falling edge and
Source 2 last falling edge
Individual mode
Individual mode shows five selected measurement items, two
channels each, on the menu bar.
View
measurement
result 1. Press the Measure key.
Measure
2. The measurement results for two selected
channels appear on the menu bar, constantly
updated. Press F1 ~ F5 to change the
measurement item.