In-Situ Virtual HERMIT Tutorial - Manual (Page 11)

Getting Started 11
2.3 ADDING A VIRTUAL HERMIT
Next Add a Virtual HERMIT by clicking the “Add Hermit” button. You can add
any number of Virtual HERMITs to the Pump Test.
Select the Virtual HERMIT icon on the left window. This will activate the
Virtual HERMIT windows on the right as shown below. By default, the
Summary screen is the first selected tab.
2.4 ADDING A TROLL
Note: Always use the “Add/
Find TROLLs” button before
the “Connect” button. “Add/
Find” will populate a HERMIT
with Level TROLLs.
“Connect” will establish a
software connection with the
TROLLs and allow you to
configure your pump test. It is
always best to physically
connect all the TROLLs to the
hub before establishing a
software connection. Select the Virtual HERMIT added in the previous step (on the left window
pane). From the Summary screen, click the “Add/Find TROLLs” button.