Jenway 6850 - Manual (Page 32)

32
6.7.1 Quantitation Measurements
Ensure that a cuvette containing the blank solution is in
the reference position in the sample chamber and
insert the cuvette containing the sample solution into
the sample position. Close the instrument lid and pres
the Start/Stop key on the keypad. Once the
measurement is complete the determined result will be
displayed in the quantitation mode screen. Further
samples can be measured in a similar manner.
6.8 STORING RESULTS
A result file can be saved to the instrument’s internal
memory.
In the quantitation mode screen press the Save key on
the instrument keypad. The instrument will ask the user
to enter a filename (max. 8 characters) using the alpha-
numeric keypad. The user can select the indicated
letters, numbers and symbols by repeatedly pressing
the key until the required value is displayed, after a
short period the next character can be entered in the
same manner. Once the filename has been entered,
press the Enter key to confirm.
6.9 RECALLING STORED RESULTS
A result file can be opened from the instrument’s
internal memory.
In the quantitation mode screen press the Open key on
the instrument keypad. The user can select from the list
of stored files by pressing the up and down arrow keys.
Once the required file has been located press the Enter
key to confirm.