KANOMAX 6710 TABmaster Capture Hood User Manual - Manual (Page 13)

6
4.2 Supplying Power with Batteries
¾ 4 AA-size batteries can be used for a power supply.
¾ Press the compartment cover lock (refer to figure ①), and then slide the cover off to open
the battery compartment.
¾ Put 4 AA-size batteries in and make certain the batteries are correctly oriented.
¾ New alkaline battery or rechargeable Ni-MH battery can be used. Never mix battery types,
or battery leakage or damage to the instrument may occur.
¾ Replace the compartment cover (refer to figure ②). The compartment cover will be
automatically locked.
¾ When power is supplied with batteries, the current charge value will be displayed on the
upper of the LCD. When the batteries run out of power, the instrument will turn off.
Note：
1． Don't use a full_power battery with low power batteries.
2． It is recommended you change batteries when the power shows low.
Turn off
1. You can’t begin a new test.
2. You can’t use the incline adjustment settings of the instrument.
3. The test may stop if the battery is low during testing.
4. The adjustment settings of the instrument may stop when the battery is
low during adjustment.
①
②