KANOMAX 6710 TABmaster Capture Hood User Manual - Manual (Page 17)

10
4.7 Measuring
4.7.1 Start and enter into the main interface
To start measuring, go to the main interface menu as shown below:
a． Test ID, Cycle——save the testing No. in Cycle and the corresponding Test ID.
b． Air flow display ——display the testing data of air flow.
c． Temperature, Humidity ——display the current temperature and humidity in real time.
d． Keypad function ——display the function of the keys in the current interface.
e． Test mode ——display the current testing mode: Single measurement, Run Avg
measurement and B.Press measurement.
f． Power supply mode ——display the current power supply from the AC adapter or the
batteries.
g． Brightness indicator ——display the current brightness of the LCD.
h． Date, Time ——display the current date and time.
Note: When “Act” is selected in the following three measurement modes,
please change the atmosphere Pressure setting in 5.1.4.
4.7.2 Single Measurement Mode
b
a
c
d
e
g
h
Test Mode：
Single
SAVE
START
MENU
2012 / 06 / 01 13 : 10 : 10
Test ID : 13 Cycle : 050
- - - -
m³/h
25.4
℃
53.4
%RH
f
“SAVE”
“START”/”STOP”