KANOMAX 6710 TABmaster Capture Hood User Manual - Manual (Page 27)

20
¾ Press or to select option item as below.
¾ Press for 2 seconds to save the changes or press
t to quit.
¾ Press or to select ID No.
¾ Press to save the changes or press to quit.
¾ Press or to select option item as below.
¾ Press for 2 seconds to save the changes or press
t to quit.
¾ For “Delete Cycles” refer to the operation steps in
“Delete IDs”.
5.4 Communication settings
Before selecting option 4 “Communication”, ensure the instrument is connected to a PC. If
you quit or disconnect the cable, the instrument will return to the waiting screen as shown on the
right below.
No Yes
No Yes
Under option 2, press .
MOVE
OK
EXIT
MENU
2. General Settings
3. Record Processing
4. Communication
5. Print
SET
1.Test Setting
4
MOVE
OK
BACK
Communication
Confirm the Connection
SET Waiting …
Waiting for communication
Under option 3, press .
Under option 1, press .
ADJ
OK
BACK
1. Delete All
2. Delete IDs
3. Delete Cycles SET
Detele
No
Select ID： 05
No
Select ID ：12
Select Cycle： 000
No
Yes
ADJ
OK
BACK
1. Delete All
2. Delete IDs
3. Delete Cycles SET
Detele
No
Select ID： 05
No
Select ID ：12
Select Cycle： 000
No
ADJ
OK
BACK
1. Delete All
2. Delete IDs
3. Delete Cycles SET
Detele
No Select ID： 05
No
Select ID ：12
Select Cycle： 000
No
Yes
ADJ
OK
BACK
1. Delete All
2. Delete IDs
3. Delete Cycles SET
Detele
Select ID： 05
No
Select ID ：12
Select Cycle： 000
No
No
12