7 load connection using remote sensing, 8 operating configuration, Load connection using remote sensing -8 – KEPCO ABC-DM SERIES User Manual
Page 32: Operating configuration -8, Grounded load connections, remote sensing -8, Isolated load connections, remote sensing -8
Advertising
2-8
ABC 040104
2.7.7
LOAD CONNECTION USING REMOTE SENSING
Figure 2-6 shows a typical configuration using remote sensing and a grounded load; Figure 2-7
shows a typical configuration using remote sensing with an isolated (“floating”) load.
FIGURE 2-6. GROUNDED LOAD CONNECTIONS, REMOTE SENSING
.
FIGURE 2-7. ISOLATED LOAD CONNECTIONS, REMOTE SENSING
2.8
OPERATING CONFIGURATION
The operating configuration can be determined by pressing MENU (with the unit in command
entry status) until the LCD reads
ABC-XXXX yymmdd-nnn, Vz.z
(XXXX indicates the model,
e.g., for the ABC 125-1DM, top line reads 1251).The calibration date (yy = year, mm = month,
dd = day) is followed by a 3-digit number (nnn), followed by the firmware version number (Vz.z).
Advertising