Description of hart interface, Process variables, Calibration management – KROHNE OPTIWAVE 7300C EN User Manual
Page 121: Methods
DESCRIPTION OF HART INTERFACE
9
121
OPTIWAVE 7300 C
www.krohne.com
03/2014 - 4000172405 - HB OPTIWAVE 7300 R07 en
Informational (Warning)
Upper Current output1 has saturated
Rd
/ Upper Current output2 has
saturated
Rd
/ Lower Current output1 has saturated
Rd
/ Lower
Current output2 has saturated
Rd
/ Measurement Old / Measurement
Tank Overfill
Rd
/ Measurement Tank Bottom
Rd
/ Measurement
Terminated
Rd
Process variables
Level
Rd
/ Distance
Rd
/ Reflection
Rd
Primary Output
Primary Function
Rd
/ Distance I1
Rd
/ %Distance
Rd
Secondary Output
Secondary Function
Rd
/ Level I2
Rd
/ %Level
Rd
Calibration Management
Define Test...
Enter Test Data...
Calibration Status...
Calibration History...
Methods
Access Rights
Supervisor / Service
Save Parameters
Diagnostics and Test
Internal Test / Set Output1 / Set Output2
Calibrate
Output1 Lower / Output1 Upper / Output2 Lower / Output2 Upper
Tables
Volum/Mass Table / Linearisation Table / Delete Tables
Empty Spectrum Recording
Reset
Customer Reset / Factory Reset / Device Restart