KROHNE OPTITEMP TT 60 C-R EN - Manual (Page 19)

11/2010 – 4000754401 – MA OPTITEMP TT60CR R01 en www.krohne.com 19
5 Operation
5.1 Connection using the KROHNE PC configuration set
ATTENTION! ATTENTION! ATTENTION! ATTENTION!
No PC may be connected to a transmitter in areas with potentially explosive atmospheres.
If you wish to configure the transmitter with the PC, this must be done outside of the area with a
potentially explosive atmosphere or by means of communication via ProfiBus.
If the transmitter is configured with the PC, a configuration cable and an adapter from the
configuration set (order number see Chapter 7.1) must be used as the connection between the
PC and the transmitter.
An ATEX certified cable must be used for transmitters bearing the
symbol.
Type A Type C
TT 60 C X X
TT 60 C X X
TT 60 R X X
Table 1: PC connection cable
Type A
Cable
Type C
Adapter
Figure 10: PC connection cable
Order number Comment
Type A (cable) VI70IPRX0002 ATEX certified
Type C (adapter) VI70IPRP0001 --