KROHNE OPTITEMP TT 60 C-R EN - Manual (Page 20)

11/2010 – 4000754401 – MA OPTITEMP TT60CR R01 en www.krohne.com 20
5.2 General
IMPORTANT NOTE IMPORTANT NOTE IMPORTANT NOTE IMPORTANT NOTE!
The TT 60 is shipped ex works with a standard configuration.
Standard settings:
Standard settings: Standard settings: Standard settings:
Address 126
Input signal Pt100, 4-wire
Output signal °C
Filter 0 s
Sensor monitoring Off
All models of the TT 60 series have a ProfiBus PA
®- interface. The transmitters can be
configured using
o
ProfiBus PA ®-
o
an IBM compatible PC.
With a PC, configuration can be carried out before the device is integrated into the ProfiBus.
Configuration using a PC requires a connection to a serial interface and the "ProfiSoft"
software.
The current version of the software is available for download on our website
http://www.krohne.com/html/dlc/index.shtml.
You can find configuration instructions in the "ProfiSoft" reference manual.