KROHNE OPTISYS SLM 2100 EN - Manual (Page 16)

3
INSTALLATION
16
OPTISYS SLM 2100
www.krohne.com 03/2014 - 4002737302 - MA OPTISYS SLM 2100 R02 en
3.3.1 Mounting of the sludge level meter
The mounting frame, which is part of the scope of delivery, can be used to mount the meter on
round or square handrails, as well as on vertical mounting posts or walls.
The first step of the installation procedure is to build the frame as shown in the picture below.
Step 1: Assembling of the mounting frame
• Assemble the two brackets and two crossbar braces with the help of bolts, nuts and washers
according to the following drawing.
INFORMATION!
All needed bolts, nuts and washers belong to the standard scope of delivery. To ensure proper
assembly, please use only the mounting material provided with the meter.
INFORMATION!
All blots, nuts and washers should be greased to prevent cold welding and ensure simple
disassemble after use.
INFORMATION!
Please ask a second person to help with this procedure.
Figure 3-1: Mounting frame
.book Page 16 Wednesday, April 30, 2014 1:39 PM