KROHNE PipePatro EN - Manual (Page 13)

OPERATION
3
13
PIPEPATROL
www.krohne.com 02/2013 - 4002275001 - MA PipePatrol R01 en
3.2 Start-up
The LDS software is automatically loaded after the monitoring station has been switched on. The
software automatically starts to record measurement data and reaches its operational state
shortly after start-up.
For the correct operation of the system, the following items should be considered:
• An uninterrupted power supply is required. Power supply variations can lead to re-starting of
the computer and in the worst case cause the PC to crash.
• The data communication between monitoring station and the metering system must be
running in order for the system to receive measurement data.
3.3 Layout of user interface
The main screen is the interface between the user and the leak detection system. The menu
layout and the different windows are shown in the following drawing.
Figure 3-1: Layout of user interface
1 Status window
2 Operator window
3 Controls