KROHNE CAPAFLUX IFM 5080 K Datasheet EN - Manual (Page 2)

Capaflux IFM 5080 K-CAP
Electromagnetic Flowmeter
... non-contact process flow measurment
from 0.05 µS/cm electrical conductivity
non-contact flow measurement
no electrodes
easy to specify
unimpeded flow cross-sectional area
optimum flow shaping
resistant to abrasion
ceramic measuring tube
dimensionally stable vacuum-resistant
outstanding accuracy
Special advantages
● capacitive electrodes for non-contact measurement.
● the measuring section is resistant to abrasion from even high solids
contents.
● the ceramic measuring tube is dimensionally stable and vacuum-
resistant.
● the special shape of the measuring tube helps to optimize the flow
profile, even with minimum pressure drop, refer to diagram on
page 3.
● the measuring error is less than 0.5% of the measured value.
● the integral design ensures easy installation, safe and reliable
operation.
● the crevice-free measuring tube has no blind spots and conforms
to food requirements, the ceramic surface is ultrasmooth,
R
a
< 0,8 µm surface finish.
ATEX approval
Ex II 2 GD KEMA 01 ATEX 2232X
● CAPAFLUX IFM 5080 K/CAP-EEx:
EEx d IIC T6 … T4
EEx de IIC T6 … T4
● CAPAFLUX IFM 5080 K/CAP/i-EEx:
with outputs intrinsic safety
EEx d [ia] IIC T6 … T4
EEx de [ia] IIC T6 … T4
2
No restrictions ...
... through insulating products with a
film-forming tendency:
asphalt, latex suspensions
... through low electrical conductivity:
ultrahigh-purity water, alcohols,
glycerins, glycols
... through high solids contens:
fruit pieces, pulps, concrete
... for sterile processes:
chemical and food industries
... when used in hazardous areas:
ATEX approval
FM certification pending
... through electrode materials:
the capacitive electrodes are located
behind the ceramic tube, i.e. non-
contact measurement, no contact with
the process product.
Calibrated on EN 17 025
accredited calibration rigs,
accuracy of calibration better
than 99.97% of the measured value.