KROHNE IFC 210 E Short EN User Manual
Condensed instructions, Signal converters for electromagnetic flowmeters
Condensed
Instructions
IFC 210 E
IFC 210 E-EEx
Signal converters for
electromagnetic flowmeters
©
KROHNE 05/2002
7.10006.11.00
Applicable to
Software Versions
●
Operating and check elements
No. 3.18393.01
●
Amplifier (ADC)
No. 3.17116.01
●
Outputs/inputs (I/O)
No. 3.19005.01
Contents
1
Electrical connection: Power
Pages 2-11
2
Electrical connection: Outputs
Pages 12-18
3
Start-up
Pages 19
4
Operator control of signal converter
Pages 20-27
PLEASE NOTE
These concise instructions do not include the following:
device description, technical data, standards, approvals, etc.,
nor conditions pertaining to product liability and warranty.
The operator is, however, obligated to take note of these
sections in the detailed Installation and Operating Instructions.
References to chapters
All references to chapters in these Condensed Instructions
refer to those of the detailed “Installation and Operating
Instructions”. It is important that the detailed Instructions
be referred to for all chapters omitted from these
Condensed Instructions. This particularly concerns
installation and operation in hazardous areas!