Installation, 4 general requirements – KROHNE BATCHFLUX 5500 C EN User Manual
Page 11
INSTALLATION
3
11
BATCHFLUX 5500 C
www.krohne.com
05/2014 - 4000827703 - HB BATCHFLUX 5500 R03 en
3.4 General requirements
INFORMATION!
The following precautions must be taken to ensure reliable installation.
•
Make sure that there is adequate space to the sides.
•
Protect the signal converter from direct sunlight and install a sun shade if necessary.
•
Support the pipeline on both side of the flowmeter.
•
Do not expose the signal converter to intense vibration. The flowmeters are tested for a
vibration level in accordance with IEC 60068-2-64.
Figure 3-1: Avoid vibrations
Figure 3-2: Avoid strong magnetic fileds
Figure 3-3: Horizontal piperun
CAUTION!
Install in a slightly descending pipe section to prevent air from collecting and to avoid faulty
measurements (meter can drain).