KROHNE OPTIFLEX 1100C EN - Manual (Page 36)

5
START-UP
36
OPTIFLEX 1100 C
www.krohne.com 01/2012 - 4001721801 - HB OPTIFLEX 1100 R01 en
5.2 Digital display screen (option)
Keypad functions
Display screen
Figure 5-1: Default screen
1 Current output percentage (bar graph and text - only shown if the output function is the same as the measurement
name on the screen in normal mode)
2 Measurement name (in this example, distance)
3 Device tag name
4 Measurement value and units
5 Device status (markers)
6 Keypad buttons
Button Function
Normal mode: Enter configuration mode
Configuration mode: Move cursor to the right
Normal mode: Change the measurement units (m, cm, in ft)
Configuration mode: Exit
Normal mode: Change the measurement name (distance, level, output (%), output (mA))
Configuration mode: Decrease value or change parameter
Normal mode: Change the measurement name (distance, level, output (%), output (mA))
Configuration mode: Increase value or change parameter