KROHNE BM 26 BASIC_ADVANCED EN - Manual (Page 89)

APPENDIX
9
89
BM 26 BASIC/ADVANCED
www.krohne.com 10/2012 - 4000347004 - HB BM26 Basic/Adv R04 en
Process connection Process connection Process connection Process connection
0 Without
1 DN15 PN40
2 DN15 PN100
3 DN20 PN40
4 DN20 P100
5 DN25 PN40
6 DN25 PN100
7 DN40 PN40
8 DN40 PN100
A DN50 PN40
B DN50 PN63
C DN50 PN100
D ½¨ 150LB
E ½¨ 300LB
F ¾¨ 150LB
G ¾¨ 300LB
H 1¨ 150LB
K 1¨ 300LB
L 1½¨ 150LB
M 1½¨ 300LB
N 2¨ 150LB
P 2¨ 300LB
R Welded pipe ½¨, sch10, length 107 mm
S Welded pipe ¾¨, sch10, length 107 mm
T Threaded pipe ¾ NPT, Sch10, male, length 35 mm
U Threaded pipe ½ NPT, Sch10, male, length 35 mm
V Threaded pipe G ¾, Sch10, male, length 35 mm
W Threaded pipe G ½, Sch10, male, length 35 mm
Flange facing Flange facing Flange facing Flange facing
0 Without (options without flange connections)
B Form B1 (EN 1092-1)
C Form C (EN 1092-1, male)
E Form E (EN 1092-1, male)
F Form RF (ASME B16.5)
Vent Vent Vent Vent
0 Without
1 3/8 NPT + plug
3 ½ NPT
4 DN40 PN40 top flange + lateral vent ½ NPT (with plug)
5 Weld connection for OPTIWAVE 7300 C
6 G ½
A As per process connection
VF42 VF42 VF42 VF42 4 Order code (complete this code on the pages that follow) Order code (complete this code on the pages that follow) Order code (complete this code on the pages that follow) Order code (complete this code on the pages that follow)