KROHNE GFM 700 EN - Manual (Page 17)

17
Fct. Text
Description and settings
3.5.0 USER DATA Submenu 3.5.0 User data
3.5.1 LANGUAGE Language for display texts, see
Sect. 5.11
• GB/USA (English)
• D (german)
• F (French)
• N (Dutch)
3.5.2 ENTRY.CODE.
1
Entry code 1 for setting level
required?
See Sect. 5.12
• NO = Entry with  key only
• YES = Entry with  key and
9-keystroke code
Setting of the code under Fct. 3.5.3
3.5.3 CODE 1 Set Code 1, see Sect. 5.12
(appears only if YES set under Fct.
3.6.2)
• Factory setting:
→, →, →, ↵, ↵. ↵, ↑, ↑, ↑
• Different code required:
Press any 9-keystroke combination
and then press the same
combination again.
Each keystroke acknowledged by
“ * ”.
WRONG CODE appears if 1 st and
2 nd entries are not equal.
Press ↵ + → keys
and repeat entries.
3.5.4 LOCATION Tag name setting
(measurement point no.)
max. 10 digits. Required only
for flowmeters of “HHC” design
(operator control via Hand-Held
Communicator MIC 500, connected
to current output).
Factory setting: ALTOMETER
Characters assignable to each
place: A..Z / a..z / 0..9 / + / -./
underscore character =
blank character.
3.5.5 OUTP. HOLD Hold values of outputs
during settings?
Setting: NO or YES
3.5.6 UNIT TEXT Text for user-defined unit
Factory setting:
hLiter/hr or US.MGal/DAY
Characters assignable
to each place:
A..Z / a..z / 0..9 / + / −-./
underscore
character = blank character.
Fraction bar ”/” in 7 th place is
unalternable.
3.5.7 FACT. QUANT Conversion factor for quantity F
M
F
M
= quantity per 1 m 3 !
Factory setting:
1.00000 E1 (for hecto Liter)
or 2.64172 E-4 (for US M.gallons)
Value setting:
0.00001*10 −
9 - 9.99999*10 +9
3.5.8 FACT. TIME Conversion factor for time F
T
F
T
in seconds!
Factory setting:
3.60000 E3 (for hour) or
8.64000 E4 (for day)
Value setting:
0.00001*10 −
9 - 9.99999*10 +9