KYORITSU 6305 Instruction Manual User Manual
Page 35
KEW6305
4.8
1 5 0 V 3 0 0 V 6 0 0 V
1 P 2 W 1 P 3 W 3 P 3 W 3 P 4 W
5 A
1 0 A
2 0 A
5 0 A
1 0 0 A 2 0 0 A 5 0 0 A 1 0 0 0 A
“Setting 06” CT ratio
For the detailed information about CT ratio, please refer to “5-3 VT/CT ratio” in this manual.
Setting range
0.01 - 9999.99
(can be set by 0.01)
Default value (or after system reset)
1.00
1 Use the
Cursor
key on the selection screen, and select “Setting 06”.
2 Press the
ENTER
key to get the instrument into setting change mode.
3 The rightmost digit of previous setting (or default value: 1.00) blinks. Change number with the
Cursor
key, and then press the
ENTER
key after making necessary change.
Function of
Cursor
keys:
To select the digit subject to change.
To change the value of selected digit.
When CT ratio is set to other than 1, “
“ mark appears on the LCD.
NOTE
* When 0 is set as a CT ratio, it is forcefully changed to 1.