KYORITSU 6305 Instruction Manual - Manual (Page 99)

KEW6305
8.2
● Before making a measurement
Ensuring your safety See “Safety warnings”.
Turning on the instrument
See “Section 3:
Preparation for measurement”.
Basic setting See “Section 4: Setting”.
Wiring See “Section 5: Wiring”.
Confirm the
instantaneous value
See “Section 6:
Instantaneous value measurement”.
Setting for demand
measurement
See “Section 4: Setting”.
Demand value
measurement
● Settings only for demand measurement
Basic setting and following settings are required for demand measurement.
“Setting 09” Recording interval
“Setting 10” Specific time period rec. or endless rec.
“Setting 11”
Time period setting Time setting
“Setting 12” Time period setting Date setting
“Setting 13” Start of continuous measurement
“Setting 14” End of continuous measurement
“Setting 15” Target demand
“Setting 16” Demand measure-ment cycle
“Setting 17” Demand warning cycle