1 survey initiation – KYORITSU 6305 Instruction Manual User Manual
Page 87
KEW6305
7.4
7-1 Survey initiation
There are two ways of starting a survey.
(1) Manual operation
Pressing
START/STOP
key on
Wh
range for 2 sec. or more starts measurement.
(2) Automatic operation (presetting the time and date)
Set the start time and date on the
SET UP
range (“
Setting 10”), and then press
START/STOP
key on
Wh
range. The instrument goes into stand-by mode, and the
measurement starts at the preset time and date.
● Manual measurement
1
Press the
START/STOP
key on
Wh
range for 2 secs. or more.
2
The file number screen is displayed for about 1 sec. followed by the measurement screen. The survey
then starts. At this time, LED status indicator is on.
File number screen
(displayed for about 1 sec.)
Measurement screen
LED status indicator
is on.