Revo R4-8-16DVR3 - Manual (Page 31)

4, 8 &16 Channel Digital Video Recorder
25
 Actions: Set the actions the DVR will take whenever an input is detected on the
selected alarm input. Alarm-In event can sound the external alarm or DVR’s
internal buzzer, notify a number of different devices, and/or move PTZ cameras
to preset positions.
Alarm Out – Select the alarm-out signals (Alarm-Out and Beep) to be associated with
the alarm input.
Notify – Select Mail if you want to send an e-mail to the address set during NETWORK – Mail setup.
PTZ – Select the preset position for each PTZ camera, where you want PTZ cameras to move to.
NOTE: For the Notify action to work, the Mail should be enabled in the NETWORK – Mail setup.
System Event Settings (EVENT
 System Tab)
 Settings: Set up the DVR to run self-diagnostics.
System – Select the interval that you want the DVR to run
self-diagnostics on the system.
Check Recording – Selecting the column allows you to set up
the check recording schedule by selecting Schedule On.
Selecting
allows you to add a check recording schedule
by setting the day, time range and interval that you want the
DVR to run self-diagnostics on the recorder.
Selecting
allows you to delete a check recording schedule.
Check Alarm-In – Selecting the column allow you to change
interval the DVR to run self-diagnostics on alarm inputs.
Disk Almost Full – Select the percentage level of disk usage
at which you want the DVR to trigger an alert.
Disk Bad – Select percentage level of bad disk sectors at which you want the DVR to trigger an alert.
Disk Temperature – Set the temperature threshold and (ºC (Celsius) or ºF (Fahrenheit)). If the temperature of hard disk
drive exceeds the defined threshold, the system triggers an alert.
 Actions: Set up actions the DVR will take whenever it detects system events. System events can sound the DVR’s
internal buzzer, notify a number of different devices and/or move PTZ cameras to preset positions.
NOTE: The Alarm Out action cannot be set to System, Boot Up, Restart, Shutdown and Panic Record events.
NOTE: For the Notify action to work, the Mail should be enabled in the NETWORK – Mail setup.
 Beep on Video Loss: Set to sound the DVR’s internal buzzer when video is lost.