Revo RESPTZ37-1/HSC/HSW Advanced Features - Manual (Page 15)

REVO America www.revoamerica.com RESPTZ37-SERIES
13
12. To delete a Preset, press the HOME key at programmed Preset position.
13. To store the Preset that you created as the default programmed action for the camera,
navigate to the DOME SETUP menu and select HOME FUNCTION. Refer to the Home
Function
procedure.
TIP
You can use a keyboard controller shortcut to create Presets on the fly.
Keyboard Controller Shortcut
1. Select a scene that you want to save as a Preset.
2. Press number 1 to 120 on the numeric keypad.
3. Press CTRL then press PRST. The current view will be stored to the selected Preset
number if the Preset number is empty.
4. If the selected Preset number is not empty, the OVER WRITE message will be displayed
on the monitor. Select the OK and move the joystick to the right to overwrite.
Example:
1 , 0 , 1 + CTRL + PRST keys will store the current view as Preset no. 101. In this
case, focus will be programmed as Auto, dwell time will be set to 3 seconds, and the current AE
mode will be programmed.