Revo RESPTZ37-1/HSC/HSW Advanced Features - Manual (Page 23)

REVO America www.revoamerica.com RESPTZ37-SERIES
21
To create area titles, proceed as follows:
1. Select NUMBER and set the desired number by moving the joystick to the left or right.
2. To edit the title, refer to the Titling procedure of the Auto Scan above to edit titles.
3. Select START ANGLE. Hold down the CTRL key while selecting the start position using
the joystick. Current panning position will be displayed. Release the CTRL key to complete
the selection of the start position. To fine adjust at the 0.1 degree interval, twist the joystick
at the pan field and the tilt field.
4. Select END ANGLE. Hold down the CTRL key while moving the joystick to select the end
position. Release the CTRL key to complete the selection of the end position.
Privacy Zone
Privacy Zones are user defined areas that are blocked from viewing by the camera. For example,
if you have an outdoor camera that has a Tour set up and it pans across a neighbor’s yard, to
avoid problems, you may want to block the view when the camera passes by the neighbor. This
menu allows you to define a Privacy Zone. You can set up to 8 Privacy Zones.
PRIVACY ZONE SETUP
(CTRL KEY)
NO TITLE METHOD
01 ABC ON BLOCK
02 DEF ON V.OFF
03 OFF ----
04 OFF ----
05 OFF ----
06 OFF ----
07 OFF ----
08 OFF ----
SAVE AND EXIT(ESC TO CANCEL)
To create Privacy Zones, proceed as follows:
1. Place the cursor at the title field.