Revo REVDN700-2 - Manual (Page 13)

Poly (Polygon)
It you select one of “a,b,c,d”, the active point is displayed.
Move the point with 4-arrow keys. Press [ENTER] key is to finish edit point.
NOTE:
* For more than 180 of interior angle is not permitted.
Line
: Select Start/End Point. It you select one of start/end,
the active point is displayed. Move the point with 4-arrow keys.
Press [ENTER] key is to finish edit point.
Posi : Adjust area position with 4-arrow keys.
- MD Event
NOTE:
* The result of MD event detection can be inaccuracy.
Zone
: Configurations for various zone events.
Following area, possible events are different.
Output Select:
Press [Enter] key on icon to watching event, popup box appear.
Alarm: Trigger alarm to output port.
Communication: Event string sends on RS-485
Screen: Display on screen.
Back: return to previous menu.
, : Send event to counting machine. (OFF : No Effect /
INC
: Increment counting value. / DEC : Decrement counting value)
NOTE:
* The result of counting value can be inaccuracy.
Screen
: Printed event at bottom side by side scrolling.
Icon Subject Range
Motion Rect,Poly,Line Motion occurred.
Motion Inside
Rect, Poly Motion occurred in the area.
Move Into Rect, Poly Object on outside moves into the area.
Appear Inside
Rect, Poly Object which appeared inside.
*) In Simple mode is not supported.
Move Out
Rect, Poly Object moves out.
*) Please don’t use as a signal for video
recording start.
Appeared &
Move Out
Rect, Poly Object which appeared inside, and moves out
*) Please don’t use as a signal for video
recording start.
*) In Simple mode is not supported.
Disappear
Inside
Rect, Poly Object disappeared inside.
*) Please don’t use as a signal for video
recording start.
*) In Simple mode is not supported.
Moved In &
Disappear
Rect, Poly Objects from outside, move into inside, and
disappears inside.
*) Please don’t use as a signal for video
recording start.
*) In Simple mode is not supported.
Loitering Rect, Poly Detect moving object within the zone during a
time.
13