Revo REVDN700-2 - Manual (Page 15)

Rst Time (sec): Time for maintain event. After this, background will be update.
Unfocus : Detection on/off of unfocused state/defocused state.
- Windy Setup (Windy Area Detection Setup)
: Not applied in Simple PVA mode
Sens(Sensitivity)
: Adjust sensitivity of windy object detection.
Det Time (sec)
: Time for judge to windy object.
Rst Time (sec) : Time for release to windy object that staying with no motion
3) Display Setup
: Configuration for information on screen.
NOTE:
* Priority: Abandon/Absent > Loiter > Moving Object > Windy
* Same priority: large object size order
Alarm
: Represent alarm icon on right-up side by of screen.
Counter
: Represent counting on left-bottom. (Det Only: When an event occurs)
Zone Area : Represent active zone.
Moving Object
: Represent moving object with white rectangle.
Loitering : Represent loitering object with green rectangle.
Abandon/Absent
: Represent abandon/absent area with wine colored rectangle.
Windy Area
: Represent moving object with violet rectangle.
4) dTracking Setup
: Configurations for digital Pan/Tilt/Zoom.
NOTE:
* Prority : Tracking priority : Zone > Loitering > Abandon/Absent > Obj.
* Maximum 4 objects can be represented.
* Same priority: Continuing detect. And Obj. > Size
- All Object: Tracking all detected object.
- Loitering: Tracking detected loitering object.
- Abandon/Absent: Tracking detected absent/abandon area.
- Zone: When zone event rising, tracking the area.
<Picture/DNR (Picture/Digital Noise Reduction)>
Menu for adjustment of video quality and DNR.
1) 2D-NR
: Adjust 2D-NR strength.
2) 3D-NR
: Adjust 3D-NR strength. Remove noise by summing several frames.
3) DNR Demo
: Represent DNR effect. Left side is none DNR screen,
Right side is DNR screen.
4) Color Enh(Color Enhance)
: Adjust of color strength.
<Effect>
1) Freeze
: When [ENTER] key pressed, still image will be output on the screen.
2) d-Effect
: Off/Rotation/Mirror/V Flip
3) Nega (Negative Picture) : Inverse color effect.
4) DIS (Digital Image Stabilization)
: Compensation to image vibration.
Because of this function used d-ptz, screen magnification will be changed.
5) dPTZ Preset
: Configuration for dPTZ preset. It will be applied when menu exit.
- Zoom: Adjust magnification.
- Pan&Tilt: Adjust Pen/Tilt position.
- Up/Down: Adjust tilt position.
- Left/Right: Adjust pan position.
6) i-Freeze:
Select term of refresh rate for output video. This function is useful to reduce
the recording data storage. When motion is detected while i-Freeze, image is refresh to
15