Techne Prime Elite - Manual (Page 60)

58
VIEWING A PROGRAM FILE
• Touch Programs And Logs to display Only
Programs.
• Search for the required program file and touch it
to highlight it.
• Touch View to open the temperature profile
(Pre-run Screen) of the program.
• Touch Start to start the program.
Note: It is not possible to send a program to a
connected Satellite unit from the View screen.
• Touch Edit to edit the program.
• Touch Back to return to the previous screen.
Note: The temperature log will remain blank until
the program has been started.
VIEWING A TEMPERATURE LOG FILE
It is not possible to view a temperature log file on
the Prime Elite. It must first be copied to a USB
memory stick then viewed on a PC using the
Techne Workbench software, which can be
downloaded free of charge from
www.techne.com
• See the directions given in the next section for
copying files to a USB memory stick.
• Copy the files to a PC and open the Workbench
software.
• Use Settings to select the path for the saved
files or click on Open to browse for the saved
files.
• Select the required temperature log and click
Open.
Note: Since the .temperaturelogdata file is a text
file, it can also be opened in applications such as
Excel for further analysis.