Thermo Fisher Scientific CyberComm 6000 for CyberScan Series 6000 User Manual

Page 16

Advertising

Instruction Manual

CyberComm 6000

7. CyberComm goes to measurement mode in ‘Untitled’ project for the selected

user. (Figure 11). You are ready to work with the meter. You can proceed with
measurement using the meter.

Figure 11 : Measurement mode

You may perform any of the following activities:

Create a new project (See page 19)

Import setup data from the meter (See page 13)

Import standardization (calibration) data from the meter (See page 13)

Import logged data from the meter (See page 13)

Note: If a user enters an invalid password for a particular user ID for
three consecutive attempts, CyberComm will ‘Lock’ the user profile and
the user will no longer be able to login to the system using that particular
user ID. This is a security feature. Only the ‘Admin’ user is able to unlock
such locked users. Refer ‘Unlocking Users’ in page 56.

Note: All the activities you do with CyberComm are bound to your user
ID and project name.

Measurement mode

Current user, project &

communication

information

Advertising