Thermo Fisher Scientific CyberComm 6000 for CyberScan Series 6000 - Manual (Page 53)

Instruction Manual CyberComm 6000
47
5.3 View Graph
The View Graph is an extension to the ‘Show graph’ feature available in CyberScan
meter for single channel measurement mode. Use this to view graphs (snap graphs)
which have been previously captured at measurement screen or view current
measurement graphs of a selected channel.
To view graph:
1. To see current measurement graph:
ƒ Make sure you are in single-channel mode. (Multi-channel check box
should be unchecked)
ƒ From Measure tab, select the channel and its parameter you wish to view.
ƒ Click Show Graph button in the measurement screen. The graph starts
plotting data.
2. Click on Reports tab.
3. Click View Graph button. The plotted graph is shown. (Figure 39)
Note: In order to view the graph of the currently selected channel, you
have to click Show Graph button in the measurement screen.