Airedale EasiCool 6kW 64kW - Manual (Page 15)

EasiCool™ Precision Air Conditioning
System Configuration
Downflow Upflow
Heating
Electric Heat
○ ○
Hot gas Reheat
○ ○
Low Pressure Hot Water
○ ○
Humidification
Humidifier
○ ○
Hot Water Condensate Pump
○ ○
Low Conductivity (Soft Water) Bottle
○ ○
Standard Conductivity (Moderate/Hard Water) Bottle
○ ○
High Conductivity (Very Hard Water) Bottle
○ ○
Cleanable Humidifier Bottle
○ ○
●
Standard Feature
○
Optional Feature
–
Not Available
Heating and Humidification
Heating
Electric Heating
Multi-stage finned electric heating elements complete with auto and manual reset overheat cut-out protection.
Standard electric heating elements are phase balanced for increased efficiency.
Electric Heating Thyristor Control
In addition to the electric heat option a 0 – 100% Thyristor shall be provided to deliver accurate heating control.
Or
Low Pressure Hot Water
A low pressure hot water coil constructed of refrigeration quality copper tube and mechanically bonded aluminium fins
can be factory fitted.
Frost protection is fitted to prevent freezing of the low pressure hot water coil assembly.
Proportional heating control is provided by a factory fitted 3 port, raise/lower type, modulating valve.
Access to the Right hand side of the unit is required to set up the regulating valve
15 EasiCool Technical Manual 7535768 V1.2.0_02_2013
Introduction