Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 27)

Programming Gas Endpoints
The procedure below is for programming an ORION Migratable/Fixed Network gas endpoint Perform the same steps for
an ORION Classic gas endpoint For a description of the fields and buttons on the screens, see "IR Programming Fields" on
page 17 and "IR Programming Buttons" on page 20
Program a Read for a Gas Endpoint
1 From the main
menu, click
IR Programming
2 Align the optical head
of the IR cable with
the gas endpoint IR
LED port
3 Click the Press to
Read button
Result: The IR
Programming
screen displays for
the endpoint.
Figure 29: Main menu
4 On the IR
programming screen,
double-click in the
Current Reading field
to select the current
read value
Figure 30: IR Programming screen for gas endpoint
IR PROGRAMMING
Page 27 April 2014 ORION® Endpoint Utility