Installing the software – Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual

Page 47

Advertising
background image

INSTALLING THE SOFTWARE

The ORION Endpoint Utility software disc is provided by Badger Meter
The basic software installation process is the same for Windows 7 and Windows XP Windows 7 users must perform the

additional steps noted page 50 Screen appearance depends on user personalization and operating system
Remove older software prior to installing a new version See

"Removing Previous Software" on page 45

OTEE:

N

In addition to the software installation instructions on the next four pages, instructions are included for

"Installing

the ME Driver" on page 51

and

"Configuring the USB Settings (Windows 7 and Windows XP)" on page 59

If you

previously installed the ORION Endpoint Utility software or have the ORION Mobile Reading System (ORS) software

installed, you can skip these sections

1 Load the ORION Endpoint Utility disc into the computer DVD drive

OTEE:

N

A DVD drive is required to install the ORION Endpoint Utility software

2 The disc folder may open automatically If not, open Windows Explorer and browse to the disc drive location

Result: The ORION Endpoint Utility files are displayed.

3 Double-click the setup.exe file

Result: The ORION Endpoint Utility Setup Wizard opens.

INSTALLING THE SOFTWARE

Page 47

April 2014

ORION® Endpoint Utility

Advertising
This manual is related to the following products: