Badger Meter Water Conditioning - Manual (Page 6)

Safety Information
The installation of the Recordall Turbo Series meter must comply with all applicable federal, state, and local rules, regulations,
and codes
Failure to read and follow these instructions can lead to misapplication or misuse of the meter, resulting in personal injury and
damage to equipment
Unpacking and Inspection
To avoid damage in transit, Badger Meter Recordall Turbo Series meters are shipped to the customer in special shipping
containers Upon receipt of shipment, be sure to follow these unpacking and inspection procedures:
NOTE: N If damage to a shipping container is evident upon receipt of a meter, request that a representative of the carrier be
present when the meter is unpacked
a Carefully open the shipping container, following any instructions that may be marked on the container Remove all
cushioning material surrounding the meter and carefully lift the meter from the container Keep the container and
all packing material for possible use in reshipment or storage
b Visually inspect the meter and applicable accessory devices for any signs of damage such as scratches, loose or
broken parts or other physical damage that may have occurred during shipment
NOTE: N If damage is found, request an inspection by carrier’s agent within 48 hours of delivery Then file a claim with the
carrier A claim for equipment damaged in transit is the responsibility of the customer
Recordall® Turbo Series Meters
Page 6 April 2014