Badger Meter Series 320 Pulse Transmitter - Manual

Installation &
Operation Manual
BadgerMeter, Inc.
Badger ®
Model 320
Programmable Scaled Pulse
Output Transmitter
872024
Rev. 6 4-09
Mechanical installation
The Model 320 may be surface mounted onto a panel, attached to DIN rails using adapter clips or wall
mounted using two optional enclosures.
Location
Although the Model 320 is encapsulated, all wiring
connections are made to exposed terminals. The unit
should be protected from weather and moisture in
accordance with electrical codes and standard trade
practices.
In any mounting arrangement, the primary concerns
are ease of wiring and attachment of the
programming cable.
The unit generates very little heat so no consideration
need be given to cooling or ventilation.
Surface Mount Installation
The Model 320 may be mounted to the surface of any
panel using double sided adhesive tape or by attach-
ing fasteners through the holes in the mounting
flanges of the unit.
DIN Rail Mounting
Optional clips snap onto the mounting flanges allowing the
Model 320 to be attached to DIN 15, 32, 35 mm DIN rail
systems.
Wall Mounting
Optional metal and plastic enclosures are available to mount
the Model 320 to a wall when no other enclosure is used. The
enclosure is first attached to the wall using fasteners through
its mounting holes.
After wiring, the transmitter may be attached to the enclosure
with the terminal headers facing in using the slots in the
mounting flanges. As an alternate mounting arrangement, the
Model 320 may be fastened to the box cover using double-
sided adhesive tape.
Model 320 Programmable Scaled Pulse
Output Transmitter Installation Guide
by Data Industrial
PN# 72024
03/20/03
®
Data
Industrial
DATA INDUSTRIAL CORPORATION 11 Industrial Drive, P.O. Box 740 Mattapoisett, MA 02739-0740 USA
Phone: (508) 758-6390 FAX: (508) 758-4057 email: [email protected]
Figure 2: 320 Optional
Enclosure Dimensions
Sid e
4.5”
2.8”
2.0”
TOP
SIDE
Figure 1: Model 320 Dimensions
Model: 320
S/N: 320-00000
S
en
so
r I
np
ut
Power Out
Signal (+)
Signal (-)
Shield
P
ow
er
In AC L /DC +
AC C /DC -
D.I.C.
Comm
Port
O
ut
pu
t Pulse Out -
Pulse Out +
Input led
output led
®
1.50”
3.65”
3.25”
.875”
1.75”
Side
1.50”
2.75”