Badger Meter Vortex Meters - Manual (Page 19)

Form No. 09-VRX-UM-00007 17
RVL (WAFER) SERIES
RVL (Wafer) Specifications
Fluid: Liquids
Connection: Wafer
Turndown Ratio: 12:1
Accuracy:
±1% of full scale (4-20 mA or 0-5 VDC)
±2% of full scale, frequency pulse
Repeatability: ±0.25% of actual flow
Materials
PVC standard
CPVC, Polypropylene, PVDF optional
Output Signals:
4-20 mA standard
0-5 VDC or frequency pulse optional (Push - Pull Driver) 150 mA
Sink or Source
Power Supply: 8 to 28 VDC
CSA Certification: CSA File 215035, CSA Standard C22.2 No. O-M and No 142-M
Response Time 2 seconds minimum, step change in flow.
Enclosure: Type 4X (IP 66)
RVL (Wafer) Nominal Flow Rates
Tube Size
(inches)
Minimum Flow
gpm (lpm)
Maximum
Flow
gpm (lpm)
Nominal Full
Scale Frequency
Hz
Weight
lbs (Kg)
½ 1.3 (4.7) 15 (56.8) 570 0.8 (0.36)
¾ 2.1 (7.9) 25 (94.6) 284 0.9 (0.41)
1 4.2 (15.8) 50 (189.3) 292 1.1 (0.50)
1½ 8.3 (31.5) 100 (378.5) 144 1.7 (0.77)
2 16.7 (63.1) 200 (757.1) 148 2.6 (1.17)
3 25.0 (94.6) 300 (1136) 61 4.8 (2.16)
MECHANICAL INSTALLATION
The RVL (Wafer) series transmitters are designed with wafer style flow bodies, which mount easily be-
tween standard ANSI style pipe flanges.
Observe the upstream piping requirements listed under “Piping requirements”. Upstream valves should
Qot Ee used to FoQtrol ÀoZ rate. They should always be kept fully open. Good quality ball valves with
integral unions may be connected directly to the flow meter if the valves are fully open during operation.
This allows easy isolation and removal of the flow meter, should maintenance be required. Cavitation
and flow rate pulsation will adversely affect flow meter performance.